The Wheeler Engineering F.A.T. Wrench is a hand driven, click/clutch system torque wrench that is very useful in apply the necessary torque to most firearms and firearm accessory fasteners. The F.A.T. Wrench features an ergonomic handle, a standard 1/4 in. hex drive tip and can be used to apply torque from 10 in./lbs. to 65 in./lbs. at 5 in./lbs. increments. Common uses include, but are not limited to, instillation of scope rings and base screws, action screws and trigger guard screws. With proper care and use, the F.A.T. Wrench will provide you with a lifetime of reliable service. Package includes 9 bits and a square drive adapter.
- Wheeler Firearms Accurizing Torque (F.A.T.) wrench
- F.A.T. wrench is used like a screwdriver, it is not a ratcheting device
- Leaving the F.A.T. wrench adjusted at a high torque setting for extended periods of time may damage the internal mechanisms, resulting in inaccurate torque adjustments, always adjust the F.A.T. wrench to the lowest torque settings after each use
- Adjusting the F.A.T. wrench beyond the torque wrench setting of 65 in./lbs. may damage the internal mechanisms, resulting in inaccurate torque adjustments
- F.A.T. wrench is compatible with all the bits contained in the wheeler engineering 89-piece screwdriver set
- Accuracy of plus/minus 2 in./lbs. up to 40 in./lbs., 40 to 65 is plus/minus 5%
- Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field
- Torque adjustment range from 10 in./lbs., to 65 in./lbs.
- Bits are made of S2 tool steel and hardened to 56-58 Rockwell C
-
Kit Includes:
- Leupold/Buehler windage bit
- #10 flat blade bit
- #11 flat blade bit
- #32 flat blade bit
- 3/32" Allen bit
- 5/32" Allen bit
- T10 Torx bit
- T15 Torx bit
- T20 Torx bit
- Square drive adapter bit
