*All firearm magazines require a valid PAL to purchase*
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
.308/6.5 Creed Metal AICS 10rnd, (With Plate 102013-BLK, Without Plate 102917-BLK)
- These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
- Available with or without the front binder plate.
-
SPECIFICATIONS
- 3.055” Outside Length
- 2.870” max cartridge overall length (COAL) with binder plate
- 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
- 2.52" Rear Height (5 rnd)
- 3.90” Rear Height (10 rnd)
MDT 10-round magazines are approximately ¾” shorter in height than standard AICS 10-round magazines due to MDT’s unique Double Stack to Single Feed (DSSF) transition design, allowing easier mag changes when shooting prone.
10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.
COMPATIBILITY
- 308WIN
- 6mm Creedmoor
- 243WIN
- 260 Rem
- 6.5 Creedmoor
- 7mm-08 Win
- 308/7.62x51 NATO
- 22 - 250 Rem (will work at a reduced capacity)
BINDER PLATE DETAILS
- The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
- The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp.
30-06 3.715" Metal AICS 5 Rnd SKU: 104269-BLK
MDT Metal 30.06 AICS magazines are manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. Compatible with AICS pattern DBM chassis and bottom metals
This magazine has a 5 round capacity based on magnum rounds.
- The standard length long action magazine in an MDT Chassis is 3.715" unless otherwise noted in the description stating CIP or 3.85 for the longer magazine well
- If you purchased a rifle direct from an OEM or retailer, please check the specifications
- Remington Tactical Chassis Rifle and 338 Lapua XCR rifles use a 3.775" magazine not available from MDT
- Tikka T3/T3x and Savage Axis long action calibers in our chassis you must use the 3.560" option
- Will not work with 300 Remington Ultra Mag, 300 Weatherby, and similar cartridges
300 PRC 3.850" Metal AICS 5 rnd SKU:105123-BLK
MDT Metal 300PRC is a CIP 3.850" length magazines that is manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. Compatible with AICS pattern DBM chassis and bottom metals which accept 3.850" CIP length magazines.
This magazine has a 5 round capacity based on magnum rounds.
- The standard length long action magazine in an MDT Chassis is 3.715" unless otherwise noted in the description stating CIP or 3.85 for the longer magazine well
- If you purchased a rifle direct from an OEM or retailer, please check the specifications
- Remington Tactical Chassis Rifle and 338 Lapua XCR rifles use a 3.775" magazine not available from MDT
- Tikka T3/T3x and Savage Axis long action calibers in our chassis you must use the 3.560" option
- Will not work with 300 Remington Ultra Mag, 300 Weatherby, and similar cartridges
300 wsm / 6.5 PRC Metal AICS 7 rnd SKU: 104979-BLK
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
7-Round Magazine for .300WSM / 6.5 PRC:
- 300 WSM, 6.5 PRC, 7 RSAUM
- 2.955" COAL
COMPATIBILITY
- 6.5 PRC
- 270 WSM
- 7 RSAUM
- 300 WSM
338LM 3.850" Metal AICS 5 Rnd SKU: 102089-BLK
MDT Metal 338LM AICS magazines are manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. Compatible with AICS pattern DBM chassis and bottom metals
This magazine has a 5 round capacity based on magnum rounds.
- The 338LM 4.050 variant magazine is not compatible with MDT Chassis Systems
- The standard length long action magazine in an MDT Chassis is 3.715" unless otherwise noted in the description stating CIP or 3.85 for the longer magazine well
- If you purchased a rifle direct from an OEM or retailer, please check the specifications
- Remington Tactical Chassis Rifle and 338 Lapua XCR rifles use a 3.775" magazine not available from MDT
- Tikka T3/T3x and Savage Axis long action calibers in our chassis you must use the 3.560" option
- Will not work with 300 Remington Ultra Mag, 300 Weatherby, and similar cartridges
